Показаны работы с 1 по 25, всего найдено 3 395

Название Авторы Издание Год ↓ Цитирование
1 Experimental study of the power characteristics influence on the hydraulic efficiency Andrenko, P., Grechka, I., Khovanskyy, S., Svynarenko, M. Lecture Notes in Mechanical Engineering 2019 0
2 Computer simulation of the processes of mixing in multilayer nitride coatings with nanometer period Sobol, O., Meylekhov, A., Postelnyk, A. Lecture Notes in Mechanical Engineering 2019 0
3 The use of waveguides with internal dissectors in the process of regeneration of industrial adsorbents by means of the energy of ultrahigh-frequency radiation Dobrotvorskiy, S., Dobrovolska, L., Aleksenko, B., Basova, Y. Lecture Notes in Mechanical Engineering 2019 0
4 Computer modeling application for predicting of the passing of the high-speed milling machining hardened steel Permyakov, A., Dobrotvorskiy, S., Dobrovolska, L., Basova, Y., Ivanova, M. Lecture Notes in Mechanical Engineering 2019 0
5 Investigation of the process of saturation of the filter liquid of soda production with ammonia and carbon dioxide in the production of ammonium chloride Pitak, I., Shaporev, V., Pitak, O., Hrubnik, A., Moiseev, V. Lecture Notes in Mechanical Engineering 2019 0
6 Methods for calculating the grain boundary adsorption capacity of nanostructured copper based condensates Zhadko, M., Sobol, O., Zelenskaya, G., Zubkov, A. Lecture Notes in Mechanical Engineering 2019 0
7 Model of thermal state of the system of application of coolant in grinding machine Stepanov, M., Ivanova, L., Litovchenko, P., Ivanova, M., Basova, Y. Lecture Notes in Mechanical Engineering 2019 0
8 Choice of the optimal parameters of the ultra-fine grained cooper machining Symonova, A., Havin, V., Savelov, D. Lecture Notes in Mechanical Engineering 2019 0
9 Simulation and design of welded plate heat exchangers with channels of different corrugation height Khavin, G. Lecture Notes in Mechanical Engineering 2019 0
10 Topological Engineering of Interfacial Optical Tamm States for Highly Sensitive Near-Singular-Phase Optical Detection Tsurimaki, Y., Tong, J.K., Boriskin, V.N., Semenov, A., Ayzatsky, M.I., MacHekhin, Y.P., Chen, G., Boriskina, S.V. ACS Photonics 2018 4
11 Metal oxide heterojunction (NiO/ZnO) prepared by low temperature solution growth for UV-photodetector and semi-transparent solar cell Klochko, N.P., Kopach, V.R., Tyukhov, I.I., Zhadan, D.O., Klepikova, K.S., Khrypunov, G.S., Petrushenko, S.I., Lyubov, V.M., Kirichenko, M.V., Dukarov, S.V., Khrypunova, A.L. Solar Energy 2018 2
12 Quality assessment of control over the traction valve-inductor drive of a hybrid diesel locomotive Buriakovskyi, S., Babaiev, M., Liubarskyi, B., Maslii, A., Karpenko, N., Pomazan, D., Maslii, A., Denys, I. EasternEuropean Journal of Enterprise Technologies 2018 2
13 Prediction of fouling tendency in PHE by data of on-site monitoring. Case study at sugar factory Demirskiy, O.V., Kapustenko, P.O., Arsenyeva, O.P., Matsegora, O.I., Pugach, Y.A. Applied Thermal Engineering 2018 2
14 Numerically-field analysis of the adequacy of the design data of three-phase induction motors and the method of their refinement on this basis Milykh, V.I. Technical Electrodynamics 2018 2
15 Probing the energy reactance with adiabatically driven quantum dots Ludovico, M.F., Arrachea, L., Moskalets, M., Sánchez, D. Physical Review B 2018 1
16 Study of anode processes during development of the new complex thiocarbamide-citrate copper plating electrolyte Smirnova, O., Pilipenko, A., Pancheva, H., Zhelavskyi, A., Rutkovska, K. EasternEuropean Journal of Enterprise Technologies 2018 1
17 Computer simulation of the process of regenerating the adsorbent using microwave radiation in compressed air dryers Dobrotvorskiy, S.S., Dobrovolska, L.G., Aleksenko, B.A. Lecture Notes in Mechanical Engineering 2018 1
18 Improving the installation for fire extinguishing with finelydispersed water Dubinin, D., Korytchenko, K., Lisnyak, A., Hrytsyna, I., Trigub, V. EasternEuropean Journal of Enterprise Technologies 2018 1
19 Developing the concept of multi-stage spent fuel cleaning fromfission products by physical methods Yuferov, V.B., Katrechko, S.V., Ilichova, V.O., Shariy, S.V., Svichkar, A.S., Shvets, M.O., Mufel, E.V., Bobrov, A.G. Problems of Atomic Science and Technology 2018 1
20 Geometrical modeling of the process of weaving a wire cloth in weightlessness using the inertial unfolding of a dual pendulum Kutsenko, L., Semkiv, O., Zapolskiy, L., Shoman, O., Kalynovskyi, A., Piksasov, M., Adashevska, I., Shelihova, I., Sydorenko, O. EasternEuropean Journal of Enterprise Technologies 2018 1
21 Electrodynamic properties of a hypercrystal with ferrite and semiconductor layers in an external magnetic field Fedorin, I.V. Superlattices and Microstructures 2018 1
22 Method of integration and content management of the information resources network Kanishcheva, O., Vysotska, V., Chyrun, L., Gozhyj, A. Advances in Intelligent Systems and Computing 2018 1
23 Electromagnetic surface waves guided by a plane interface between a porous nanocomposite and a hypercrystal Fedorin, I., Khrypunova, A., Khrypunova, I. Optik 2018 0
24 Process integration of crude oil distillation with technological and economic restrictions Ulyev, L., Vasiliev, M., Boldyryev, S. Journal of Environmental Management 2018 0
25 Semitransparent p-CuI and n-ZnO thin films prepared by low temperature solution growth for thermoelectric conversion of near-infrared solar light Klochko, N.P., Klepikova, K.S., Kopach, V.R., Tyukhov, I.I., Zhadan, D.O., Khrypunov, G.S., Petrushenko, S.I., Dukarov, S.V., Lyubov, V.M., Kirichenko, M.V., Khrypunova, A.L. Solar Energy 2018 0


H H5 C C5
41 17 12171 2003

Экспорт в csv-файл: статей | авторов


© 2018 — Разработано лабораторией информационно-поисковых систем НТУ "ХПИ"